Complete the Schematic Layout

1.  Open Schematic Layout Editor
2.  Select from Right Toolbar Place Symbol 
3.  Click Mouse on Grid (Symbols Libraries will load)
4.  Type in Search Field 9HT10
5.  Select 9HT10-32.768KBZF-T then click OK
6.  Place in Sector B1 Hit ESC Key.

7.  Select Annotate Icon from Upper Toolbar. Click on Annotate tab.
8.  Select Assign PCB Footprint to Schematic Symbol Icon from Upper Toolbar.
9.  After Footprints load select J1 Conn_01x06_Male  then select from Left Column Connector_PinHeader_2.54mm
10. Select Line item 20 Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical as seen in Figure 2
Repeat these steps for adding all component symbol.