AVRDUDE Class

Items needed for workshop

• Breadboard, Jumper wires, LED's, Resistors
• Laptop - Windows or Linux.
• ATmega328P Target Board

Install the following programs

• 1. AVRdude.exe https://www.nongnu.org/avrdude/
  
• 2. Arduino IDE 1.8.1 https://www.arduino.cc/
  
• 3. Ensure the correct Drivers are installed for your programmer.
  

Refer to setup procedures documentation Set Up Procedures For Workshops
All examples used in this workshop are shown using the USBtiny ISP Programmer.

---