Installation and use

From media_wiki

Revision as of 21:12, 17 August 2021 by U731219879 rc (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Installation and setup

Connect a USB Micro B cable with power adapter to the wall plug you want to monitor.<\
Connect the USB Micro B cable from that adapter into J1 on the PCB board.
Note: This does not power the board microcontroller but will turn on the green LED on.

Retrieved from "http://www.microrusty.com/mediawiki/index.php?title=Installation_and_use&oldid=512"