AVRISP mk II
Revision as of 03:47, 23 March 2019 by U731219879 rc (talk | contribs) (Created page with " http://www.fischl.de/usbasp/ USBasp - USB programmer for Atmel AVR controllers USBasp is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMe...")
USBasp - USB programmer for Atmel AVR controllers USBasp is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed.
The USBasp is quite possibly the cheapest programmer out there, but you should be careful when buying them; some versions use outdated firmware or are missing jumpers. Make sure that your model has three jumpers (or three pairs of holes with J1, J2, and J3 printed next to them). You can find them on eBay starting at only $3. Be wary of the shipping times that the Chinese ones come with.
Example Usage: avrdude -p t84 -P usb -c usbasp -U flash:w:<FILE>
