Difference between revisions of "Installation and use"
(Created page with "'''Installation and setup'''<br> Connect a USB Micro B cable with power adapter to the wall plug you want to monitor.<\ Connect the USB Micro B cable from that adapter into...") |
|||
| Line 3: | Line 3: | ||
Connect the USB Micro B cable from that adapter into J1 on the PCB board. | Connect the USB Micro B cable from that adapter into J1 on the PCB board. | ||
'''Note:''' This does not power the board microcontroller but will turn on the green LED on. | '''Note:''' This does not power the board microcontroller but will turn on the green LED on. | ||
| + | [[File:MainPowerpic.png |350px|left]] | ||
Revision as of 21:12, 17 August 2021
Installation and setup
Connect a USB Micro B cable with power adapter to the wall plug you want to monitor.<\ Connect the USB Micro B cable from that adapter into J1 on the PCB board. Note: This does not power the board microcontroller but will turn on the green LED on.
