View source for Set Up Procedures For Workshops

== Windows 10 ==
'''Arduino IDE''' The newest version 1.8.6 may not work for this Workshop!
* Download Arduino '''Version 1.8.1''' - https://www.arduino.cc/en/Main/OldSoftwareReleases
* Select '''Windows''' not Windows Installer
* Unzip '''arduino-1.8.1-windows.zip''' 
* Move unzipped folder to Documents folder (Optional)
* Open Arduino IDE and update the following Arduino Libraries: 
    '''Adafruit Unified Sensor, DHT Sensor Library, U8glib'''
----
'''AVRdude''' (avrdude.exe)  ''The real power behind Arduino''

 '''Windows Setup'''
 1. AVRdude Web Page:  '''http://savannah.nongnu.org/projects/avrdude''' 
 2. Select [[http://http://download.savannah.gnu.org/releases/avrdude/ '''''Download Area''''']] 
 3. Select latest Version: '''avrdude-6.3-mingw32.zip'''  
 4. Unzip '''avrdude-6.3-mingw32.zip''' 
 5. Create new folder for AVRdude. Move unzipped files to your newly created AVRdude_6_3 folder.
 6. Open '''CMD.exe''' (Windows Command Line) 
 7. Find and Open the AVRdude program. Windows Example: '''C: Documents\AVRDude-V6-3.''' cd Documents\AVRDude-V6-3
 8. Type '''''“avrdude”'''''  The avrdude help menu should display a list of commands.
----

'''Zadig''' (zadig-2.4.exe)
 Used for USBTiny & USBasp unsupported drivers in Windows 10
* Download Zadig http://zadig.akeo.ie/
* Click on: Zadig 2.4 (4.9MB) 
'''Do Not use until Instructed to do so!
'''
----
'''Putty''' Used for RS232 serial interface
Download Putty https://putty.org/

Run putty-64bit-0.70-installer.msi

----
'''Silicon Labs''' ''CP210x USB to UART Bridge RS232 Interface''
 '''URL for drivers:''' 
   https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
* CP210x_Universal_Windows_Driver.zip

----

'''FDTI 232''' interface - Nothing needed. Should automatically install.

----

== Ubuntu 18.04 ==
'''ARVdude''' ''The real power behind Arduino''
 '''Linux Setup'''
 Check that AVRdude 6.3 is installed and working.
 1. Open terminal and type "'''''avrdude'''''". AVRdude should display the help menu.
 If it does not display the help menu then enter the following in the terminal:
 '''“''sudo apt install avrdude''”'''. Repeat step one to ensure it is working.

----
Test '''USBTiny''' or '''USBasp''' works with '''AVRdude'''
* Connect USBTiny or USBasp to a USB port.
* Connect '''ATmega328''' Target Board to to '''USBtiny''' or '''USBasp'''.
* Open Terminal and type the follow: "'''''avrdude -p m328p -c usbtiny -v'''''"

----
'''Arduino IDE'''
*1.  Open Ubuntu Software  
*2.  Search for Arduino IDE
*3.  Select install.
*4.  After Install completes Select permissions 
*5.  Select Launch
*6.  Under tools tab select Programmer and pick your programmer.
*7.  Under tools tab select Board - Arduino uno
*8.  Open Blink sketch under examples in File Tab
*9.  Upload Using Programmer under Sketch Tab

== Windows 7 ==
'''Arduino IDE''' The newest version 1.8.6 may not work for this Workshop!
* Download Arduino '''Version 1.8.1''' - https://www.arduino.cc/en/Main/OldSoftwareReleases
* Select '''Windows''' not Windows Installer
* Unzip '''arduino-1.8.1-windows.zip''' 
* Move unzipped folder to Documents folder (Optional)
* Open Arduino IDE and update the following Arduino Libraries: 
    '''Adafruit Unified Sensor, DHT Sensor Library, U8glib'''
----
'''AVRdude''' (avrdude.exe)  ''The real power behind Arduino''

 '''Windows Setup'''
 1. AVRdude Web Page:  '''http://savannah.nongnu.org/projects/avrdude''' 
 2. Select [[http://http://download.savannah.gnu.org/releases/avrdude/ '''''Download Area''''']] 
 3. Select latest Version: '''avrdude-6.3-mingw32.zip'''  
 4. Unzip '''avrdude-6.3-mingw32.zip''' 
 5. Create new folder for AVRdude. Move unzipped files to your newly created AVRdude_6_3 folder.
 6. Open '''CMD.exe''' (Windows Command Line) 
 7. Find and Open the AVRdude program. Windows Example: '''C: Documents\AVRDude-V6-3.''' cd Documents\AVRDude-V6-3
 8. Type '''''“avrdude”'''''  The avrdude help menu should display a list of commands.
----
'''Adafruit USBTiny drivers:''' 
https://learn.adafruit.com/usbtinyisp/drivers

[[File:AdafruitDriver1.PNG]]<br>
'''Click Install'''<br>
Since 3 checkboxes were checked, the installer will install 3 drivers, asking about installing each one.<br>
[[File:AdafruitDriver2.PNG]]<br>
'''Check Device Manager'''<br>
[[File:AdafruitDriver4.PNG]]<br>
Your Done

----
==[[ AVRDUDE Class]]==